![]()
The Resource For All Your Welding, Gases and Safety Supplies!
1.ESAB.6
The Resource - (Arc Welding Equipment)
Specifications
Miggytrac 1001
CONTROL VOLTAGE
36-46 VAC
POWER
20 W
WELDING SPEED
6-47 ipm (15-120 cm/min.)
REMOTE CONTROL OUTLET Volt and ampere (wire feed speed)
CONNECTION
Burndy, 12 pins
DIMENSIONS L x W x H
10.5 x 10 x 10.5 in. (266 x 257 x 267 mm)
WEIGHT
15.5 lbs. (7 kg)
Specifications
Single SAW Twin SAW
WIRE DIAMETER
STEEL
1/16-5/32 in.
(1.6-4.0 mm)
0.045-3/32 in.
(2 x 1.2-2.5 mm)
STAINLESS
1/16-5/32 in.
(1.6-4.0 mm)
0.045-3/32 in.
(2 x 1.2-2.5 mm)
CORED WIRE
1/16-5/32 in.
(1.6-4.0 mm)
--
--
MAXIMUM WIRE FEED SPEED 354 ipm (9 m/min.)
354 ipm (9 m/min.)
FLUX VOLUME
6 L
6 L
ELECTRODE WEIGHT
66 lbs. (30 kg)
2 x 33 lbs. (0.9 x 15 kg)
Miggytrac 1001
Small, compact motorized tractor.
Q
Quickly attaches to ESAB welding torch
Q
Increased welding speed, especially when using cored wire
Q
Decide travel direction with the remote control
Q
Start/stop function from the remote control panel
A2 Multitrac with A2-A6 Process Controller PEK
The universal welding automat for submerged arc welding (SAW) and MIG welding.
Q
Choose single or twin wire for submerged arc welding (SAW)
Q
Designed for use with LAF or TAF and Aristo 1000 welding power sources
Q
Four-wheel drive carriage with encoder for feedback
Q
A2-A6 Process Controller – stores 255 weld sets
Q
Digital control panel for exact preset and control of welding parameters
WEIGHT, EXCLUDING WIRE
AND FLUX
104 lbs. (47 kg)
104 lbs. (47 kg)
PERMISSIBLE LOAD 100% 800 A
800 A
CONTROL VOLTAGE
42 VAC
42 VAC
TRAVEL SPEED
4-67 ipm
(0.1-1.7 m/min.)
4-67 ipm
(0.1-1.7 m/min.)
LINEAR SLIDES SETTING
LENGTH
3.5 in. (90 mm)
3.5 in. (90 mm)
ROTARY SLIDE SETTING
ANGLE
360°
360°
Single SAW Twin SAW
Mechtrac 1730/2100/2500/3000
Fast, flexible mechanized gantry for increased productivity.
Q
Equipped with A2-A6 process controller PEK and A2 welding equipment
for mechanized submerged arc welding (SAW) or MIG welding
Q
Weld I-, T-, or L-beams, straight columns, or tapered columns
Q
Standard gantry leg height of 59 in. (1500 mm)
Q
Designed for use with LAF or TAF and Aristo™ 1000 welding power sources
Q
Available in four gantry widths: 68 in. (1730 mm), 83 in. (2100 mm),
94 in. (2500 mm), 118 in. (3000 mm)
Q
Standard dual-drive motors
Specifications
Mechtrac 1730/2100/2500/3000
TRAVEL SPEED
8-75 ipm (0.2-1.9 m/min.)
MAXIMUM LOAD
485 lbs. (220 kg)
STANDARD RAIL LENGTH
9.8 ft. (3 m)
